Yamaha CHR12 Speaker

Yamaha CHR12 Speaker

Price: Contact

Code: Yamaha CHR12

Status: Stocking

  • RMS power (W): 500W
  • Peak power (W): 1000 W
  • Max SPL (dB): 124 dB
  • Sound angle: H90゚ x V60゚
  • Operating frequency range: 54 Hz - 20 kHz
  • Impedance: 8 Ω
  • Dimensions (HxWxD): 578 x 359 x 340 mm
  • Weight: 17.1 kg
    Top Selling Products

Yamaha Full Range speakers are a type of speaker that is capable of producing a wide range of sound frequencies from bass to treble without the need for dedicated sub-speakers for each frequency range (such as bass, mid-range, and treble). This means that Full Range speakers can produce the entire sound spectrum without having to coordinate with other speakers.

In a Full Range speaker, a single driver is responsible for reproducing all audio frequencies, from low bass to high treble. However, because this speaker does not have additional drivers for each frequency range, the sound quality at the very high or very low frequencies may not be as optimal as in speaker systems with multiple drivers for separate frequency ranges.

Full Range speakers are often used in applications where compact design is required or in simple sound systems where convenience and cost effectiveness are priorities.

1. Yamaha CHR12 speaker specifications

General specifications
Speaker type: 2-way Speaker, Bass-reflex
Frequency range (-10dB): 54 Hz - 20 kHz
Coverage area H90゚ x V60゚
Crossover 2.0kHz
Nominal impedance
SPL

Sensitivity (1W; 1m on axis): 94 dB SPL

Peak (Calculated): 124 dB SPL

Components

LF: Diameter: 12" cone, Voice Coil: 2.5", Magnet: Ferrite

HF: Diaphragm: 1.4", Type: 1" throat compression driver, Magnet: Ferrite

Power rating

NOISE: 250 W

PGM: 500W

PEAK: 1000 W

I/O connectors SpeakON NL4MP x 2 (Parallel)
Cabinet material Plywood
Finish Durable Polyurea Painting, Black
Handle Top x1, side x2
Pole socket Φ35 mm x2 (Bottom, 0° or -7°)
Rigging Top x 2, Rear x 1 (Fit for M10 x 30 ~ 50 mm Eyebolts)
Dimensions

W: 359 mm (14.1")

H: 578 mm (22.8") (with rubber feet)

D: 340 mm (13.4")

Net weight 17.1 kg (37.7 lbs)
Options U-bracket: UB-DXRDHR12

2. Outstanding features of Yamaha CHR12 speakers

  • Cabinet design optimized for a wide range of acoustic environments

The CHR series features a wide range of loudspeakers with enclosures optimized to meet the needs of specific applications.

The Yamaha CHR10 and Yamaha CHR12 speakers are equipped with a swivel horn and dedicated U-bracket for use in permanent and utility installations. The CHR12 and CHR15 also feature dual angle pole sockets, allowing them to be used as temporary main speakers for sound reinforcement.

Yamaha CHR12 Speaker
Yamaha CHR12 Speaker
  • Custom designed converter

High-power woofers deliver powerful, clear bass with minimal distortion, while 1.4”* precision compression drivers produce accurate mid and high frequencies.

Yamaha CHR12 Speaker
Yamaha CHR12 Speaker
  • A sturdy, highly portable cabinet

The CHR series features the same plywood enclosure as our renowned CZR speakers for durability and superior audio performance.

  • Intelligent processing to maximize system performance

When used in conjunction with a Yamaha PX Series amplifier or other compatible signal processors, CHR Series speakers can take full advantage of dedicated speaker processor adjustment settings. (*Supported software is Ver1.63 or later.)

Yamaha CHR12 Speaker
Yamaha CHR12 Speaker
  • Dual angle pole mount socket (CHR15, CHR12)

Depending on the venue, your mix can sometimes be affected by low ceilings or other room characteristics that can prevent a clear, even mix and significantly reduce the audience's listening experience. The CHR15 and CHR12's pole mount socket offers two positions - 0° or -7° - to direct the sound energy away from reflective surfaces and towards your audience where it belongs.

Yamaha CHR12 Speaker
Yamaha CHR12 Speaker

3. Contact to buy genuine Yamaha speakers at good prices here

If you want to buy genuine Yamaha speakers at good prices, please contact the information below:

Hanoi: 0972.787.123

HCMC: 0913.222.075

Email: hsvavl@gmail.com

Website: http://proavl.vn/

Hanoi Branch: No. 229, Van Tri Street, Van Noi Ward, Dong Anh District, Hanoi

HCM City Head Office: 184/20 Le Dinh Can, Tan Tao Ward, Binh Tan District, HCM City

86 views
Gửi đánh giá của bạn cho sản phẩm này!
gửi đánh giá

Hiện chưa có đánh giá nào về sản phẩm này!

0972 787 123
callnow2
callnow3